3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
lux.alih
11-22 19:54
Model Name
kitchen knife 3d model
Tags
blade
game asset
game asset stylized
kitchen knife
props
props game asset
props game asset stylized
props stylized
stylized
Input
Prompt
Create a precise, watertight 3D model of a dual-ended kitchen tool based on the reference blueprint image. This tool has a small knife on one side and a circular corer on the other side, with an ergonomic handle in the middle. Please match the overall proportions of the image, but use the following real-world dimensions in millimeters: - Overall total length: 230 mm. HANDLE (center part): - Handle length (between the two functional ends): 120 mm. - Cross-section: soft oval. - Width of oval: 24 mm. - Height of oval: 28 mm. - All edges of the handle have 3 mm fillets for a smooth, ergonomic grip. KNIFE SIDE: - Visible blade length outside the handle: 70 mm. - Blade height (from edge to spine): 18 mm. - Blade spine thickness: 2.5 mm. - The cutting edge has a double bevel, with a final edge thickness of about 0.8–1.0 mm. - The blade shape is like a small paring knife: slightly curved cutting edge and a semi-rounded tip (0.5 mm fillet). - The blade transitions into the handle with a 10 mm tang and a strong fillet of radius 6 mm at the junction. CORER SIDE: - Cylindrical corer length (from handle to teeth): 30 mm. - Inner diameter of the corer cylinder: 30 mm. - Wall thickness of the cylinder: 2 mm (outer diameter ≈ 34 mm). - The lower rim of the cylinder has 18–20 small triangular serrated teeth: - Tooth depth: about 1.5 mm. - Tooth angle: about 60 degrees. - Tooth tips are slightly rounded with a 0.3 mm fillet (not razor sharp, suitable for plastic). - Above the cylinder there is a circular flange (hand support): - Flange diameter: 50 mm. - Flange thickness: 3 mm. - Outer edge of the flange has a 2 mm fillet. NECK BETWEEN HANDLE AND CORER: - Neck length: 10 mm. - Neck diameter: 20 mm. - Use large fillets of 6 mm between the neck and the handle, and between the neck and the corer cylinder, to avoid stress concentration. GENERAL REQUIREMENTS: - The tool is one single solid piece, suitable for 3D printing in PLA or PETG. - Keep all transitions smooth; no sharp internal corners except at the serrated teeth and knife edge. - Make the model symmetric around the tool’s long axis. - Do not add textures or logos; only clean, production-ready geometry. Use the input image as front/side/perspective reference for the overall shape, but strictly follow the dimensions above for real-world scale.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
lux.alih
lux.alihlux.alih