3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
safakdemirhan
12-15 06:34
Model Name
printer panel 3d model
Tags
3d printing
3d printing realistic
bambu lab
printable
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a printable STL design for an adjustable clothes folding board optimized for Bambu Lab X1 Carbon Combo (256x256 mm build plate). Design requirements: - 3-piece modular design: 1) Fixed middle panel 2) Adjustable left folding panel 3) Adjustable right folding panel - No part may exceed 250 x 250 mm footprint. - Panels should be flat, rigid, and suitable for vertical printing. - Middle panel size: 300 x 420 x 7 mm (split if needed for printability). - Side panels size: 240 x 420 x 6 mm. Adjustment mechanism: - Sliding rail system on both sides of the middle panel. - Rail tolerance: 0.3 mm clearance for PETG. - Include click-stop positions labeled S, M, L, XL (approximately 210 / 230 / 250 / 270 mm folding widths). - Side panels must lock securely but move by hand without tools. Folding mechanism: - Bottom edge pivot using pin-based hinge. - Hinge pin diameter: 5 mm. - Hinge clearance: 0.35 mm. - No supports required for printing. Printing constraints: - Material: PETG. - Layer height: 0.28 mm. - Infill: 15% gyroid. - Wall count: 3 perimeters. - Design must avoid overhangs greater than 45 degrees. Extra features: - Raised arrows or numbers indicating folding order. - Hanging hole at the top of the middle panel. - Flat back surface for stability. - Optional embossed logo area. Output: - Export individual STL files for each part. - Parts must assemble without screws (snap-fit or pin-fit only).
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
safakdemirhan
safakdemirhansafakdemirhan