3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1781166907
06-11 08:39
Model Name
outdoor weather station 3d model
Tags
architecture
3d printing
realistic
Prompt
Create a realistic CAD model of an outdoor weather station enclosure for 3D printing. Internal dimensions: 154 mm length × 115 mm width × 75 mm height. IMPORTANT ROOF: The roof must be tilted at EXACTLY 35 DEGREES. The roof angle is mandatory. The roof is designed for Córdoba, Spain. The roof must not be flat. The roof must clearly have a 35-degree slope from back to front. SOLAR PANEL: A square solar panel measuring 147 mm × 147 mm must be mounted directly on top of the sloped roof. The solar panel must follow the same 35-degree angle as the roof. The solar panel must be visible and integrated into the design. VENTILATION: Maximum airflow is required. Each side wall must contain: * 10 circular holes of 15 mm diameter. * 2 large ventilation grilles. Total: * 40 circular holes of 15 mm diameter around the enclosure. * 8 large ventilation grilles around the enclosure. The holes must be clearly visible and evenly distributed. The enclosure should look highly ventilated. OTHER FE
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!