reverse trike chassis 3d model

Create a realistic workshop‑build reverse trike in mid‑construction. Show a raw steel chassis made from 38mm square tubing with visible welds. The front suspension box is 400mm wide and 350mm tall, with upper and lower A‑arms, 300mm coilover shocks, and ATV steering knuckles. Include 4x110 hubs with 1‑inch aluminium wheel adapters converting to 4x100 compact car rims, using black 13-inch front wheels. Show the 450mm‑wide cockpit floor ladder welded behind the suspension box, with a front‑mounted driver seat frame, pedal mounts, and steering column brackets. Display two 950mm square‑tube upper spine rails fish‑mouthed and welded to the Honda CG 250cc motorcycle steering head tube, plus lower 400mm chassis ties connecting to the motorcycle frame. Keep the full Honda CG 250cc rear section intact: engine, swingarm, chain, sprocket, and rear wheel. Add a 38mm round‑tube roll hoop (900mm tall × 450mm wide) with 45° rear down‑braces. Show brake lines routed along the frame, wiring harness ext