3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1768865684
01-20 00:04
Model Name
construction helmet 3d model
Tags
3d printing
3d printing realistic
construction helmet
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Input
Prompt
Create a simple, non-realistic 3D model of a construction helmet keychain. The model must be one single solid object, completely solid inside, with no hollow areas, no shell, and no internal structure. The helmet must NOT be hollow; it must be a completely solid, massive volume from top to bottom, with no interior cavity, so the flat base is simply the cut face of a solid block, not a hollow shell. The model must be purely monochrome geometry. Do NOT apply any colors, materials, textures, vertex colors, gradients, shading, stains, smudges, or surface artifacts. Any color information from the image must be ignored. The helmet surface must be perfectly smooth everywhere, except for the logo geometry. No unintended marks, blobs, dents, stains, or irregularities are allowed. The model must be created from a solid block, and the entire bottom must remain a single, perfectly flat plane. The base must be 100% flat, straight, and planar, with full contact on the build plate, and no curvature, no bevels, and no rounded edges on the bottom. Use only the uploaded image as the exact source for the logo geometry. The logo must be identical to the uploaded image, pixel-for-pixel in shape, with no simplification, no reinterpretation, no smoothing, no changes of proportions. The logo must be applied ONLY as clean geometric relief. The logo contains no text and must be embossed exactly 3.0 mm. The logo must be a clean geometric emboss in positive relief, raised EXACTLY 3.0 mm from the helmet surface. The entire model, including the logo, must be fully solid and massive, with no hollow, no shell, no cavities, and no internal voids. The embossed logo must have sharp, clean edges and flat faces, suitable for painting. No color, texture, shading, or surface marks are allowed on or around the logo area. On the back center of the helmet, add a very small rear tab for a keychain. The tab must be short and compact, extending only slightly beyond the helmet body. In the exact center of this rear tab, add one single circular hole for a keyring. The rear keychain tab must have EXACTLY ONE single, small, centered circular hole, with no duplicate, mirrored, or additional holes anywhere on the model. Do not elongate the rear tab. Do not place holes on the sides or helmet body. Do not add realistic helmet details, interior parts, vents, straps, bumps, feet, textures, or decorative geometry. The model must be pre-oriented for 3D printing, resting flat on the base, requiring no supports. Clean, watertight, manifold geometry, optimized for FDM 3D printing.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1768865684
Anonymous1768865684