3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1754118133
12-08 07:18
Model Name
bas-relief sculpture 3d
Tags
3d printing
3d printing clay
bas relief sculpture
clay
decorative
props
props 3d printing
props 3d printing clay
props clay
sculpt
sculpted
Prompt
Create a single-piece 2D relief artwork with a fully flat backside and all sculpted details raised only on the front surface. The design shows the back view of a girl holding a large bouquet of heart-shaped elements above her head, with a long braided hairstyle and a decorative bow. All details must be embossed or lightly raised, with smooth gradients, no undercuts, and no hollow or open areas. 🔽 STRUCTURE FROM BOTTOM TO TOP 1. Bottom Section – Skirt / Tail-Like Dress (Flat-Back Relief) At the bottom, create a fan-shaped dress resembling a mermaid tail or fishtail gown. It has a wide, curved base and narrows upward towards the waist area. The lower edge contains soft, rounded pleats: 6–10 vertical pleat divisions. Each pleat is separated by shallow grooves (NOT deep cuts). All edges are smoothly rounded, slightly thick, and stylized to avoid delicate points. 2. Torso & Back View of the Girl Above the dress, sculpt the slender back silhouette of a girl facing away. Torso is only suggested with smooth contours—no arms, no side gaps. The torso seamlessly merges into the hair above and the dress below. 3. Braided Hair (Main Central Element) The girl has a thick, long braid positioned from head top to upper back. The braid must be centered vertically with the model. Braid details: Classic 3-strand woven pattern. Each segment clearly embossed with rounded edges. Gentle tapering toward the bottom. Ends just above the dress flare. 4. Decorative Bow A large bow sits in the middle portion of the braid. Bow details: Two symmetrical, rounded bow loops. A central knot—oval or circular. Two short ribbon tails overlaying the braid. Bow must appear thick, smooth, and fully connected to the braid. 5. Head & Upper Hair At the top, sculpt the back of the head: A soft rounded head shape. Upper hair transitions into the braid. No face, since this is a back-view design. 6. Cluster of Puffy Hearts (Left-Side Heavy Composition) Above the head, design a dense cluster of rounded heart shapes. Hearts must: Appear plump and balloon-like. Be fully merged onto the relief surface—no floating parts. Begin slightly above the head. Spread diagonally toward the upper left. Extend slightly toward the right, but main bulk remains left-weighted. Hearts overlap lightly, each defined by shallow separation grooves. Total cluster should form a rounded silhouette on top. 🔧 MODEL REQUIREMENTS Flat back: Entire rear surface must be perfectly flat with no texture. Front-only sculpting: All details must be shallow embossed/raised relief. No deep undercuts, no holes, no hollow windows, no thin protrusions. Soft cartoon/chibi style, smooth curves, visually cute and elegant. All elements (dress, braid, bow, hearts) must merge smoothly into the base plane. ✨ Final Look & Style A clean, high-resolution 2D embossed relief model. Balanced vertical composition: Dress at bottom, Braid and bow in center, Hearts cluster forming the top portion. All surfaces thick, strong, and suitable for casting. Design the model from bottom to top as follows: Lower part – dress / tail At the bottom, sculpt a flowing, fan-shaped dress or tail that widens outward, similar to a mermaid tail or fishtail gown. The tail/dress is symmetrical around the vertical center line. The lower edge has multiple rounded pleats or segments, like soft vertical panels, each separated by shallow grooves. All corners are rounded and slightly thick, with no sharp or thin points. Body & upper torso Above the tail, suggest a narrow torso that smoothly transitions into the hairstyle. The girl is facing away from the viewer; only the back is visible. The body shape should be slender and elegant, but stylized and solid, with no separate arms sticking out. Braided hair The hairstyle is the main central element, starting from the upper back of the head and flowing down to overlap the upper part of the tail/dress. Sculpt a thick, long braid running vertically down the center: Start with a rounded hair mass at the top of the head. Then create a braided texture with intertwined strands forming a classic three-strand braid pattern. Each braid segment is clearly separated by shallow V-shaped grooves, but kept soft and rounded. The braid should slightly taper as it goes downward and end just above where the tail/dress starts to flare out. The braid should sit on the central axis, with its bottom tip aligned with the center of the tail. Hair bow At the upper middle part of the braid, sculpt a large decorative bow. The bow has two symmetrical loops and two short tails: Loops are rounded, puffed, and sit horizontally across the braid. The bow tails point slightly downward over the braid. In the center of the bow, add a small circular or oval knot detail. The bow should feel thick and chunky, not thin or fragile, and it should sit firmly on top of the braid. Cluster of hearts above the head Above the girl’s head, on the upper left side, sculpt a dense cluster of small puffy hearts. Each heart is rounded and plump, with a soft, cartoon-like shape. Hearts should be arranged in a tight bunch, overlapping slightly, so they look like a bouquet or bunch of balloons. Place the hearts so that: They start just above the top of the head and extend diagonally toward the upper left. A few hearts can be slightly to the right, but the cluster is mainly on the left side. The hearts should increase the silhouette width more on the left side, giving an asymmetrical top shape. All hearts are fully connected to the main body through gentle overlaps or merges—no separate floating parts. Overall shape & surfaces The overall outline of the model should follow the combined silhouette of: Tail/dress at the bottom, Central braid and body in the middle, Heart cluster at the top left. The back of the model is completely flat and smooth. The front has medium-depth relief, with all elements (braid, bow, hearts, tail) smoothly emerging from the base without deep undercuts. All transitions between elements (hair to body, braid to tail, hearts to head area) are softly blended, so the model is strong and easy to demold in real life. No holes, no empty spaces, no thin spikes or fragile extensions—everything is slightly thickened and rounded. Style Overall style is cute, romantic, and slightly chibi, with soft curves and simplified, readable shapes. Keep proportions harmonious and vertical, forming a tall, elegant figure with the heart cluster clearly visible and the braid and bow as the focal points in the center. Generate this as a clean, high-resolution 3D bas-relief model ready for manufacturing.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1754118133
Anonymous1754118133Anonymous1754118133