phone stand 3d model

Create a single-piece, FDM-printable desktop phone stand based closely on the reference. Designed for a smartphone WITH a protective case. Exact dimensions: 70mm W × 85mm H × 75mm D, with a 12mm-high front retaining lip. Use a symmetrical A-frame design with a broad, slightly backward-leaning front support and wide flat base. Add a centered U-shaped cable notch in the front lip. The rear must be ONE continuous, consistent support structure connected to the base, with identical geometry on both sides. Add ONE centered, rounded-corner triangular through-cutout in the rear support, leaving a strong uniform border. Add optional recessed circular magnet pockets around the triangle; the stand must work without magnets. Keep geometry watertight, manifold, solid, strong, and suitable for one-piece FDM printing. No floating parts, random holes, thin fragile features, text, or logos. Ensure front, side, rear, and 3D views all represent the exact same geometry and proportions.