3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1744937713
03-29 14:00
Model Name
injection molded cover 3d model
Tags
props
3d printing
realistic
Input
Prompt
Create a single-piece injection-molded plastic curved cover. Overall shape: - A shallow cylindrical curved panel, rectangular in plan view. - Approx overall size: 90 mm long, 70 mm wide including side pivot pins. - Main shell thickness about 1.5 to 2 mm. - The panel is curved across its width, not along its length. Front side: - A full-width front flange folded downward. - A centered rounded-rectangle slot in the flange. - Below the slot, on the outside, a centered semi-oval finger pull tab. - Front corners slightly chamfered or rounded. Side edges: - Both long edges have shallow downward side walls for stiffness. Back side / inner side: - Complex integrated hinge and latch support geometry. - A transverse internal beam near the back edge. - Two downward hook-like support legs near the left and right ends. - Two small vertical ribs/posts on the beam near center. - Two diagonal reinforcing ribs connecting the beam to side structures. - A small central tongue-like feature below the rear beam. Pivot pins: - One cylindrical horizontal pin on each side near the rear edge. - Pins aligned coaxially. - Approx outer diameter around 4 mm. - At least one pin appears hollow with a central hole. - Pins must be filleted and structurally integrated into the rear side support geometry. Important: - This must be modeled as one continuous molded shell, not assembled from separate floating solids. - All rear internal ribs, hook legs, and side pins must be fused into the shell with realistic plastic part transitions. - Add slight fillets at rib roots and pin bases to mimic injection molded design.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1744937713
Anonymous1744937713