reclining cat 3d model

Create a single-piece, watertight 3D-printable reclining tiger cat card holder based closely on the reference image. Cute stylized cat lying horizontally, raised head, pointed ears, four small paws, rounded elongated body and long tapered tail resting on the ground. Approximate proportions: 200mm long × 80mm wide × 80mm high. Smooth solid sculpted body with rounded edges and stable flat underside. Add a REAL horizontal card slot on the upper side of the torso, approximately 120–140mm long and 3–5mm wide, extending into an internal cavity for holding small cards. The slot must be an actual opening/negative geometry, not a surface line. Internal cavity should hold approximately 12 cards with 2.5–3mm minimum walls. Keep the model one connected manifold mesh, strong enough for FDM 3D printing, with no separate parts or base. Preserve the reference silhouette and proportions. Tiger stripes should be shallow embossed/recessed geometry.