five-point star 3d model

Create a single solid 3D model of a five-pointed star with an attached halo ring, designed for 3D printing as one piece. Scale and dimensions: – Overall size must fit exactly within 5 x 5 inches (127 mm x 127 mm) – Total thickness: 1 inch (25.4 mm) – Use real-world units, do not auto-scale Star geometry: – Classic symmetrical five-point star – Rounded edges with soft bevels – Front face slightly convex – Back face flat – Solid interior, no hollow sections Halo ring (STRUCTURAL, ATTACHED): – A circular ring surrounding the star horizontally – The ring must be physically connected to the star, not floating – The ring should be embedded into the back of the star, partially intersecting the star body – At least three solid connection points where the ring merges into the star – Clean boolean union between ring and star – Ring thickness approx 0.5 inches (12–13 mm) – Ring center aligned with the star center Critical constraints: – ONE single watertight mesh – No separate parts – No floating geometry – No thin