orthopedic height-increase insole 3d model

Create a solid full-length orthopedic height-increase insole, shaped like a normal shoe insole with a longitudinal wedge profile. The model must have a smooth height drop from the heel toward the front, like a real heel lift insole. Important geometry: - The heel is the highest part. - Rear outer heel side height: 3.5 cm. - Central heel standing surface height: 3.0 cm. - From the heel area forward, the insole must gradually taper down in height along the length of the foot. - The height must decrease smoothly and naturally from heel to toe. - The front/toe area must become thin, like a normal insole. - The top surface must stay continuous, usable, and foot-shaped. - The bottom surface must be stable and mostly flat. - The side profile must look like a clean wedge: high at the heel, lower at the arch, thin at the toes. Do not twist the model. Do not bend the forefoot upward or downward. Do not create a bowl, cup, hollow, basin, concave pocket, or deep side walls. Do not create a spoo