3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
ohhbearrr
03-02 13:27
Model Name
aluminum lid 3d model
Tags
foil
props
props realistic
props rendering
props rendering realistic
realistic
rendering
rendering realistic
tab
Prompt
Create a thin circular aluminum foil lid with a small circular pull tab attached on the right side. The main lid is a perfect circle (1:1 ratio). The pull tab diameter is approximately 30% of the main circle diameter and is centered horizontally on the right edge. The lid is in a halfway peeled-back state. The right side (where the tab is) is lifted upward and bent back approximately 60–90 degrees. The peel begins at the right edge and curves smoothly toward the center of the lid. About 40–50% of the lid surface is lifted. The peeled portion should curve naturally like thin aluminum foil — smooth continuous bend, not rigid. Add slight realistic soft creasing near the fold line where the peel starts. The unpeeled portion remains flat and horizontal. The foil thickness should be very thin (approximately 0.3 mm relative scale). No branding, no printed graphics, no text. Neutral metallic aluminum material. Studio lighting. Clean white background.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
ohhbearrr
ohhbearrrohhbearrr