3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1771468890
02-19 08:42
Model Name
two-part 3d printable tool
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
two rectangular
Prompt
Create a two-part 3D printable tool consisting of two rectangular cuboids that clip together face-to-face. Each individual part dimensions: Length: 250 mm Width: 40 mm Thickness: 10 mm Assembled total thickness must equal 20 mm. Piece A – Ruler Channel Half Add centered rectangular recess at 125 mm along length axis. Recess dimensions: 33 mm (length) × 40 mm (width) × 2.3 mm depth. Add 0.5 mm chamfer to recess edges. Add two alignment pins: Diameter 5 mm Height 3 mm Located 40 mm from each end along length axis Centered across width (20 mm from sides). Add male snap rails along both long edges: 1.8 mm high × 3 mm wide Engagement depth 6 mm Piece B – Magnet Half Add centered magnet cavity on mating face: 32 mm (width) × 16 mm (length). Inside cavity create two magnet pockets: 15.2 mm × 15.2 mm × 0.9 mm depth Spaced 1 mm apart Designed for 15 × 15 × 1 mm magnets Magnets sit 0.1 mm proud. Maintain minimum 2 mm bottom wall thickness. Add matching alignment holes: 5.25 mm diameter 3.5 mm depth Add female snap rail grooves with 0.25 mm clearance. Chamfer Rules Apply 0.5 mm chamfer to all external edges of both parts EXCEPT: Leave a 36 mm centered section of the bottom mating edge of the magnet half completely unchamfered. Branding Emboss “BIG DIPPER” centered on outer face of magnet half Text height 0.8 mm Print Requirements FDM optimized (PLA or PETG) No supports required Minimum wall thickness 2.4 mm Watertight manifold STL
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1771468890
Anonymous1771468890