3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773870679
03-28 09:48
Model Name
flower mold 3d model
Tags
3d printing
3d printing realistic
flower mold
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a two-part split mold (shell) based on a 6-petal flower-shaped object with smooth rounded edges and inward petal cavities. The object has: - A circular flower shape with 6 rounded petals - A slightly domed top surface - Soft inward grooves forming petal-shaped cavities - A flat base Mold design requirements: - Generate a hollow cavity offset from the original object with a uniform clearance of 1.5 mm - The mold must be split into two parts along a horizontal plane positioned at mid-height of the object - The split must allow easy demolding despite the inward petal cavities (undercuts) Geometry considerations: - Ensure the split line passes through the widest الجزء of the petals - Slightly soften or compensate inner cavity edges to avoid locking during demolding - Add a small draft angle (1–2°) on vertical surfaces where possible Structure: - Each half is a solid block with an internal cavity matching the offset flower shape - Add a flange (12 mm wide) around the perimeter at
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773870679
Anonymous1773870679