3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1762849433
11-16 14:55
Model Name
waterproof electronics enclosure 3d model
Tags
3d printing
3d printing realistic
electronics
machine
machine 3d printing
machine 3d printing realistic
machine realistic
realistic
waterproof
Prompt
“Create a waterproof rectangular tile-like enclosure for an electronics project. The design includes a main box with a screwed top lid that can be removed. Size approximately similar to a small floor tile: around 16 cm × 16 cm × 6 cm. The top panel should be flat and have a recessed area sized for a small solar panel. On the right side of the main box, attach a small external water-collection chamber (mini tank) with an open top. This external box should be about 6 cm × 6 cm × 6 cm. In the center of the wall connecting the main box and the external mini tank, add a perfectly circular hole to mount a turbidity sensor probe (DFRobot SEN0189). The turbidity sensor should insert horizontally through the main box wall and extend into the external chamber. On the opposite side of the main box, create a small circular mounting hole for a float switch (SEN0204 stainless steel float switch). The float switch mounts externally and should be able to move freely. Inside the main box, include mounting posts for ESP32 DevKit, TP4056, MT3608, battery holder, buzzer, LED, and wiring. The box should be fully sealed except for the sensor holes. Add screw holes on the top corners for tightening the lid. Make the design sturdy, clean, and ready for 3D printing as a single STL model.”
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1762849433
Anonymous1762849433