sanitary pad 3d model

create an object shaped like a sanitary pad with wings. total length is 210mm. the shape is a tapered elongated oval with soft transitions. front taper zone is from 0 mm to 45mm lengthwise, with width transitions from 45mm to 60mm and radius at tip of 22.5mm. central zone is from 45mm to 165mm lengthwise, with a constant width of 65mm with straight side walls and a slight 2mm radium corner blend into tapers. the rear taper zone is from 165mm to 210 mm lengthwise with width transitions from 65mm to 50mm and a rear tip radius of 25mm. the shape is a symmetrical continuous double-oval spline with no straight edges. the wings attach at 45% from either end, wing length is 38mm and wing tips radius is 10mm. the wing curve must taper smoothly into the body of the pad and the wing backward sweep angle is 15 degrees. the object height is 25mm with wall thickness of 1.5mm