3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
nikivk85
11-05 05:42
Model Name
award trophy 3d model
Tags
3d printing
3d printing realistic
antennas
award trophy
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Input
Prompt
Create an ultra-realistic, high-detail 3D model of a metallic 90’s-style award trophy inspired by MTV logos. The trophy should have a smooth matte gray metal surface and consist of two stacked rectangular blocks on a rounded base with two antennas on top, just like a vintage TV. The top block must feature large raised 3D letters that clearly say: “90’S PARTY” The apostrophe and all characters must be perfectly legible, bold, and evenly spaced. The lower block must feature four centered lines of raised text, each perfectly aligned and easy to read: 1️⃣ BEST DRESSED 2️⃣ NIKI & PASCAL 3️⃣ 40 + 40 + 10 4️⃣ 90’S PARTY All text must be embossed (raised) from the surface, not painted, with consistent depth and sharp edges. The trophy should have clean geometric lines, realistic proportions, and accurate depth to each block. The antennas on top should be slightly thickened to be structurally solid for resin 3D printing. Ensure the overall size ratio is approximately 183 mm tall × 245 mm wide × 46 mm deep, with a slightly convex rounded base and perfectly balanced symmetry. Render the geometry with sharp corners, smooth shading, and no deformations of the text. Make sure every letter is crisp and clear. The result must be a single watertight 3D mesh, optimized for 3D printing.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
nikivk85
nikivk85nikivk85