3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Artistrybytay
07-23 07:15
Model Name
enclosure lid 3d model
Tags
props
3d printing
realistic
Prompt
Create Front_Cover_Upper, a watertight FDM part for Bambu P1S. Finished full cover is 304.8H x 241.3W x 3.2T mm; this part is the upper half, split horizontally. Rounded outer corners R8. On inner vertical edge add alternating piano-hinge knuckles for a 3.0 mm removable pin; bore 3.5 mm, 0.4 mm gaps, strong fillets, chamfered bores. Along bottom seam add 6–8 evenly spaced 5 mm alignment sockets/pegs, 8 mm deep, 0.25 mm clearance, chamfered, matching lower half. Add bold raised “NURSMIND” text, 1.5 mm high. Add 3 logo-plate mounting holes, 4.3 mm diameter, arranged around the horizontal seam so the plate bridges both halves; at least 1 hole must be on this upper half. Flat-printable, minimum 2.4 mm walls, no fused moving parts.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Artistrybytay
ArtistrybytayArtistrybytay