3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
doisplayersjogando
02-04 20:06
Model Name
adjustable desk clamp 3d model
Tags
3d printing
3d printing realistic
adjustable
clamp
knob
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
CreateCreate a functional 3D-printable adjustable desk hook clamp. Design: - One fixed C-shaped body that sits on the edge of a desk. - An outward-facing integrated hook for hanging bags or headphones. - Inside the body, a smooth vertical slot (no threads). - One sliding block inside this slot that moves up and down and does not rotate. - One vertical trapezoidal threaded screw connected to a wide flat butterfly-style knob at the bottom. - Turning the butterfly knob moves the sliding block up and down to clamp the desk. Requirements: - All parts fully 3D printed (no metal). - Rounded edges and fillets for strength. - Designed for FDM printing (PETG/ABS). - Separate parts: body, slider block, screw with butterfly knob. a functional 3D model of an adjustable desk hook clamp that can support up to 5 kg. The clamp should consist of three main parts: 1. **Fixed C-shaped body**: - A rigid "C" profile that rests on the edge of a desk or shelf. - The top horizontal part sits on the tabletop. - Below it, a smooth vertical slot (no threads) where a movable block slides. - Include a strong outward-facing hook integrated into the body for hanging bags or other items. - Rounded edges and internal fillets for strength. 2. **Movable slider block**: - A rectangular block that fits and slides snugly up and down inside the body’s vertical slot. - This block will receive the threaded screw. - Ensure a vertical guiding system so it cannot rotate, only translate up and down. 3. **Threaded screw with butterfly knob**: - A fully 3D-printed trapezoidal screw that fits through a threaded hole in the movable slider block. - At the bottom end of the screw, integrate a large flat butterfly-style knob (printed as one piece) for hand tightening. - The butterfly knob should be wide and flat to distribute load and avoid marking the desk underside. - The screw axis should run vertically through the slider block, so turning the knob raises/lowers the block. Design specifications: - Suitable for FDM printing in PETG or ABS. - Include generous fillets on internal corners and reinforcement ribs toward structural load areas. - Provide clear part separations so it can
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
doisplayersjogando
doisplayersjogandodoisplayersjogando