3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1782466136
06-26 09:30
Model Name
belt drive sprocket 3d model
Tags
machine
rendering
realistic
Prompt
Design a 22-tooth Gates Carbon Drive CDX rear belt sprocket that uses the Hope R22 Direct Mount interface instead of the Gates spline. Requirements 1. Gates Tooth Profile Use the Gates Carbon Drive CDX belt tooth geometry exactly as shown on the supplied 22T Gates sprocket. Tooth pitch, tooth profile, flank angles, root radius, belt engagement, crown profile, and outer diameter must remain identical to the original Gates component. The finished sprocket must remain fully compatible with a Gates CDX belt. 2. Tooth Count 22 teeth. Preserve the original Gates pitch diameter and belt geometry. 3. Center Mount Replace the original Gates internal spline with the Hope R22 Direct Mount interface. The Hope interface must: Match the supplied Hope R22 chainring exactly. Copy the complete internal spline geometry. Copy the lockring seating face. Copy all mounting faces. Maintain the same rotational indexing. Preserve the same mounting depth and interface thickness. The sprocket must install ex
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
