3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1772875395
03-07 09:47
Model Name
pcb enclosure 3d model
Tags
3d printing
3d printing realistic
enclosure
pcb enclosure
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Design a 3D printable enclosure for a PCB measuring 150 mm × 100 mm with an overall height of 90 mm. The enclosure should be a two-part structure (bottom housing + removable lid) with 3 mm wall thickness. Internal dimensions should be about 154 mm × 104 mm to provide clearance for the PCB and connectors. Include four cylindrical standoffs (6 mm height, 6 mm diameter, 3 mm screw hole) aligned with the PCB corner mounting holes for M3 screws. The center headers hold an ESP32, the top header is for a GPS module, the right side header is for a Zigbee transceiver, and another right section is for an SD card reader. Add a square opening or mesh on the top above the GPS antenna and a 6–8 mm side opening or mesh near the Zigbee antenna for RF transmission. Include top ventilation slots and a small cable exit port, and secure the lid with four corner screws.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1772875395
Anonymous1772875395