3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1777054815
04-24 18:55
Model Name
handheld enclosure 3d model
Tags
props
3d printing
realistic
Prompt
Design a 3D printable handheld enclosure for an electronic device. The enclosure must fit comfortably in one human hand like a TV remote — 140mm tall × 75mm wide × 30mm thick. All outer edges and corners must have 10mm rounded radius for comfortable grip. The device will be held and touched frequently by blind users so smoothness is critical. The enclosure consists of two separate shells: a front shell and a back shell, joined by 4 recessed M3 screw holes (3mm diameter) at each corner. Minimum wall thickness 2.5mm throughout. Front shell surface layout from top to bottom: At the top center, one recessed rectangular zone 30mm wide × 20mm tall, 1.5mm deep, with 8mm corner radius. Inside this recessed zone, exactly 6 circular holes arranged as one standard Braille cell: 2 columns × 3 rows, 2.5mm center-to-center spacing between all holes, each hole 1.5mm diameter. These 6 holes represent a single Braille character cell. Below the Braille zone, three circular cutouts 16mm diameter arranged
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1777054815
Anonymous1777054815