3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
82.peter.johansson
11-19 18:18
Model Name
futuristic cylinder 3d model
Tags
3d printing
3d printing sci fi
cylindrical container
props
props 3d printing
props 3d printing sci fi
props sci fi
sci fi
Input
Prompt
Design a 3D printable hollow cylindrical sash storage tube for Freemason ceremonial sashes. The outer cylinder should measure approximately 4 inches (10.2 cm) in diameter and 6 inches (15.2 cm) in length, with wall thickness of 3-4mm for structural integrity. The interior should be completely hollow with a smooth, polished finish to prevent fabric snagging. Create a removable end cap that fits snugly with either a twist-lock mechanism or friction-fit design, sealing one end completely. At the center of the interior, install a removable winding mechanism—either a thin rod or dowel (8-10mm diameter) that spans the full length of the cylinder, or a spring-loaded take-up reel system. The sash would attach to this central core and wind around it like a scroll. The winding mechanism should have a small external access point (perhaps a hex key slot or knurled knob) that protrudes slightly through the sealed end cap, allowing the user to rotate the core and wind the sash tightly inside. The open end of the cylinder should have a smooth, slightly flared rim to guide the sash in and out without catching. Include subtle interior guides or rails to keep the sash centered as it winds. Add small drainage holes near the sealed end to prevent moisture buildup. The exterior should feature a dignified, smooth finish with an optional flat area for engraving lodge details. The entire assembly should be printable in sections if needed, with clear assembly instructions for joining components. Design for standard PLA/PETG printing with minimal supports required.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
82.peter.johansson
82.peter.johansson82.peter.johansson