3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1769101125
01-24 20:50
Model Name
gear system 3d model
Tags
3d printing
3d printing realistic
gear housing
hydrodynamic
machine
machine 3d printing
machine 3d printing realistic
machine realistic
realistic
Prompt
Design a 3D-printable hydrodynamic gear system inspired by a fluid torque coupler. The model should include: • A circular sealed housing (two-part clamshell) • Two internal rotor discs mounted on parallel shafts • Each rotor has curved vanes or spiral fins to move fluid efficiently • A small gap between rotors so motion is transferred through fluid shear • Shaft holes aligned for bearings or bushings • O-ring grooves or flange lips for sealing • Transparent front face version for visualization The system should be printable on a consumer FDM printer (PLA/PETG) without support inside the chamber. Output the design as separate STL files: • housing_front.stl • housing_back.stl • rotor_left.stl • rotor_right.stl • shaft_coupler.stl Dimensions: • Outer diameter: ~120 mm • Chamber depth: 20 mm • Rotor diameter: 45 mm • Shaft diameter: 5 mm The design must be watertight when assembled and suitable for filling with water or silicone oil. Generate the geometry and export clean, manifold STL meshes.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1769101125
Anonymous1769101125