3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1775437924
05-27 05:14
Model Name
skeleton hands 3d model
Tags
props
3d printing
realistic
Prompt
Design a 3D-printable Raspberry Pi 5 case shaped as two simplified skeleton hands holding the device like a relic. Prioritize first-print success, strength, and cooling. Pi 5 mounts on a rigid base using standard holes with reinforced standoffs and 2–3mm clearance. Fully support official active cooler with a completely open 25mm+ vertical airflow zone above CPU (no roof or obstruction). Skeleton hands must be thick, low-detail, and reinforced—no thin bones or sharp tips. Fingers are solid curved beams forming a loose cradle around the Pi with 5–8mm gaps for ventilation and cable routing. Include oversized, forgiving cutouts for USB, USB-C power, HDMI, and microSD (add +1–2mm tolerance). GPIO fully open or recessed. Optional 5” screen mounts in front with a strong 3mm+ bezel, framed by hands without touching display area. FDM print safe (PLA/PETG), max 45° overhang, 3mm walls, 6–8mm finger thickness. Split into 3 parts: left hand, right hand, base with alignment pins or M3 screws.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1775437924
Anonymous1775437924