3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
xyzx14668
01-28 05:02
Model Name
medical tablet dispenser 3d model
Tags
3d printing
3d printing realistic
machine
machine 3d printing
machine 3d printing realistic
machine realistic
realistic
tablets
Prompt
Design a 3DIsometric cutaway technical render of a medical tablet dispenser featuring three upside-down transparent cylindrical chambers arranged side-by-side. Tablets are stacked vertically inside each cylinder and are pushed downward by internal spring-loaded pusher plates located above the tablet stacks. The lower ends of all three cylinders extend approximately 1 inch into a single shared conical funnel, allowing tablets from each tube to enter the same funnel opening. The funnel smoothly guides tablets toward one common dispensing point. At the bottom of the funnel, include a hinged dispensing flap (trapdoor mechanism) that opens and closes to release one tablet at a time and remains closed to temporarily hold the tablet before dispensing. The design should have a clean industrial medical aesthetic, a white background, realistic proportions, smooth surfaces, and clearly labeled internal components, including cylinders, stacked tablets, springs, pusher plates, funnel, and flap mechanism. CAD model Isometric cutaway render of a medical tablet dispenser with three inverted transparent tubes containing stacked tablets and spring pushers, all tubes extending 1 inch into a single shared funnel, bottom hinged flap dispenser, clean industrial design, white background, labeled parts.oPrompt: Design a 3D CAD model of a medicine tablet dispenser with three inverted vertical cylindrical tubes mounted side-by-side on a rectangular base. Each cylinder stores stacked tablets and is closed at the top with a removable refill cap. Inside each inverted cylinder, include a spring-loaded circular pusher plate positioned above the tablets to apply downward pressure. At the bottom of each cylinder, add a conical funnel that guides the tablet toward a central dispensing point. Below each funnel, design a hinged flap (trapdoor) mechanism that can open and close to release one tablet at a time and remain closed to hold the tablet when not dispensing. The flap should be positioned horizontally, pivoting on a small hinge, and sized to securely support a single tablet. All components should be modular, mechanically realistic, and suitable for 3D printing, with smooth edges, proper clearances, and simple engineering geometry. Use a clean engineering CAD style, neutral colors, transparent cylinders, and realistic proportions. The model should be suitable for exploded view and section view visualization.f a medicine tablet dispenser with three vertical cylindrical tubes mounted side-by-side on a rectangular base. Each cylinder is transparent, hollow, and sized to hold stacked round tablets. Inside each cylinder, include a spring-loaded circular pusher plate at the back that pushes tablets forward. At the bottom of each cylinder, add a rotating dispensing disc with a single tablet-sized hole to allow controlled release of one tablet at a time. The rotating disc is positioned horizontally and aligned with the cylinder outlet. Include a rear removable cap for refilling tablets and compressing the spring. All mechanical parts should be clearly separated and manufacturable, suitable for 3D printing, with smooth edges and simple geometry. Use a clean, functional, engineering-style design, neutral colors, and realistic proportions.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
xyzx14668
xyzx14668xyzx14668