3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1769956777
02-01 14:41
Model Name
boomerang 3d model
Tags
3d printing
3d printing realistic
boomerang
realistic
weapon
weapon 3d printing
weapon 3d printing realistic
weapon realistic
wingspan
Prompt
“Design a 4-wing boomerang with a total wingspan of 20 cm. Each wing should be 3–4 cm wide. The center of the boomerang should be thicker and heavier, about 6–8 mm, to provide stability during flight. The tips of the wings should be thinner and lighter, around 3–4 mm, to allow smooth rotation and a proper return. The top surface of the wings should be slightly curved (cambered) to generate lift, while the bottom should be flat or only slightly curved to maintain stability. The wings should gradually taper from the thick center to the thin tips and have a gentle twist along their length to improve balance and aerodynamics. Round off the wing tips to prevent sharp edges and improve safety. Use 3D-printable materials such as PLA or PETG. Keep the center solid for strength, while the wings can be hollow or filled with 20–30% infill to reduce weight. Overall, the design should ensure a smooth, stable flight and that the boomerang reliably returns when thrown.”
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1769956777
Anonymous1769956777