3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
royzagros
07-18 20:16
Model Name
aquarium lid 3d model
Tags
3d printing
3d printing realistic
aquarium
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Design a clean, functional 3D-printable aquarium lid for a rectangular fish tank. The overall shape should be a simple flat rectangular lid with slightly rounded corners and a low-profile design. Requirements: * The lid should fully cover a standard rectangular aquarium. * On the right side, include a large open cutout that runs from the back edge toward the center. This opening should be wide enough to accommodate multiple cables, airline tubing, heater cables, HOB/internal filter parts, and other aquarium equipment without needing to remove the lid. * Include a sliding feeding hatch near the center (or slightly left of center). The hatch should slide open and closed in built-in rails and be large enough for feeding fish or adding small amounts of food without removing the entire lid. * The lid should be designed as a single printable part, with the sliding hatch as a separate moving piece. * Add small reinforcement ribs underneath to reduce flex while keeping material usage reasona
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
