3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1774136749
03-25 23:35
Model Name
card display stand 3d model
Tags
3d printing
3d printing realistic
furniture
furniture 3d printing
furniture 3d printing realistic
furniture realistic
realistic
rectangular card
Prompt
DESIGN A CLEAN MODERN MINIMAL 3D PRINTABLE DISPLAY HOLDER FOR A PSA GRADED CARD OR TOP LOADER. THIS SHOULD BE ONLY THE HOLDER AND OUTER ENCLOSURE, NOT THE ELECTRONICS. IMPORTANT: DO NOT MODEL A CARD. DO NOT MODEL AN E INK SCREEN COMPONENT. DO NOT MODEL AN ESP32 BOARD. DO NOT MODEL WIRES. DO NOT SHOW ANY INTERNAL PARTS. ONLY CREATE THE PHYSICAL HOLDER WITH HIDDEN INTERNAL SPACE INSIDE THE BASE FOR ELECTRONICS. THE DESIGN SHOULD LOOK LIKE A PREMIUM MUSEUM STYLE COLLECTOR DISPLAY PEDESTAL. FEATURES: A WIDE RECTANGULAR BASE WITH CLEAN CHAMFERED EDGES AND A PREMIUM MINIMAL LOOK. A SLIGHT BACK LEAN FOR THE CARD, ABOUT 12 TO 15 DEGREES. A UNIVERSAL CARD SLOT OPTIMIZED FOR A PSA SLAB BUT ALSO ABLE TO FIT A TOP LOADER. THE CARD SHOULD DROP IN EASILY AND BE REMOVABLE WITH ONE HAND. ONLY A SMALL AMOUNT OF THE CARD SHOULD BE HIDDEN AT THE BOTTOM. THE HOLDER SHOULD MAKE THE CARD APPEAR TO FLOAT ABOVE THE SCREEN AREA. ADD A SUBTLE REAR SUPPORT TO PREVENT THE CARD FROM SLIDING BACK TOO FAR, BUT KEEP THE SUPPORT VISUALLY HIDDEN. BELOW THE CARD, ADD A CLEAN RECESSED WINDOW FOR A 2.13 INCH E INK DISPLAY. THE DISPLAY AREA SHOULD BE CENTERED UNDER THE CARD. THE DISPLAY WINDOW SHOULD HAVE A THIN BEZEL AND LOOK FLUSH AND POLISHED. THE DISPLAY OPENING SHOULD LOOK LIKE A FINISHED SCREEN MOUNT, NOT AN OPEN ELECTRONICS BAY. THE DISPLAY SURFACE MAY ANGLE SLIGHTLY UPWARD FOR READABILITY. THE BASE SHOULD HAVE HIDDEN INTERNAL CAVITY SPACE TO FIT A FULL SIZE ESP32 BOARD AND DISPLAY CONNECTIONS, BUT THESE PARTS MUST NOT BE VISIBLE OR MODELED. THE STRUCTURE SHOULD BE A MAIN BODY WITH A REMOVABLE BOTTOM COVER. ADD A USB C PORT OPENING ON THE BACK OF THE BASE, NOT THE SIDE. THE USB PORT OPENING SHOULD BE A SIMPLE CLEAN CUTOUT FOR DIRECT ACCESS. MAKE THE FRONT FACE CLEAN WITH NO LOGO, NO BUTTONS, NO TEXT. KEEP THE SHAPE SIMPLE, ELEGANT, AND REALISTIC FOR PLA 3D PRINTING. THE DESIGN SHOULD FEEL LIKE A REAL PRODUCT HOUSING, NOT A CONCEPT RENDER WITH EXPOSED COMPONENTS. CREATE ONLY THE EMPTY PHYSICAL SHELL OF A PREMIUM TRADING CARD DISPLAY STAND. DO NOT INCLUDE OR RENDER A CARD. DO NOT INCLUDE OR RENDER A SCREEN. DO NOT INCLUDE OR RENDER A MICROCONTROLLER. DO NOT INCLUDE OR RENDER ANY WIRES OR ELECTRONICS. SHOW ONLY THE HOLDER ITSELF. THE STAND SHOULD HAVE A CLEAN RECTANGULAR BASE WITH CHAMFERED EDGES, A RECESSED SCREEN WINDOW BELOW THE CARD, A SLIGHTLY TILTED CARD SUPPORT, A HIDDEN INTERNAL CAVITY, A BOTTOM COVER, AND A USB OPENING ON THE BACK. THE CARD SUPPORT SHOULD BE LOW PROFILE SO THE CARD LOOKS LIKE IT FLOATS. THE DESIGN SHOULD BE MODERN, MINIMAL, PREMIUM, AND SUITABLE FOR 3D PRINTING.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1774136749
Anonymous1774136749