3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773576212
03-15 12:15
Model Name
phone holder 3d model
Tags
3d printing
3d printing realistic
phone holder
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Design a compact 3D printable phone holder that fits completely inside the cup holder of a car, specifically sized for a Mercedes-Benz A220 W177 2019 cup holder. The base must be a cylindrical insert that sits inside the cup holder, not outside it. The base cylinder must have an outer diameter of 70 mm and a height of 65 mm with 3 mm wall thickness. The interior of the cylinder must be hollow to allow storage of extra charging cable. The charging cable must enter from the rear of the holder through a slot that is 10 mm wide and 8 mm high. From the back edge of the cylinder a solid inclined ramp must rise forward at about 60 degrees forming a single integrated structure. The ramp must be about 80 mm wide and 4 mm thick and acts as the back support where the phone leans. The ramp must connect directly to the top of the cylindrical base with no vertical column or articulated arm. At the bottom of the ramp there must be a horizontal ledge where the phone rests. This ledge must be 70 mm wid
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773576212
Anonymous1773576212