3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
drn86686
07-26 19:15
Model Name
arduino enclosure 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Design a compact, minimalist 3D-printable enclosure for an Arduino Uno with a snap-fit lid (no screws required). The enclosure should securely hold one Arduino Uno with enough internal clearance for jumper wires and cable routing. Include a side opening aligned with the Arduino DC barrel jack so a 9V battery connector can be plugged in without opening the case. Add a front rectangular opening for an IR obstacle sensor so the transmitter and receiver face outward. Include a circular opening (about 10–12 mm) for a small active buzzer so the sound can exit clearly while the buzzer remains mounted inside. Provide simple internal supports to keep the Arduino stable and allow easy wire management. The lid should open and close using friction-fit clips for quick access. Use rounded edges, 2–3 mm wall thickness, and a clean, functional design optimized for FDM 3D printing with no support material required. Ensure all openings are properly aligned and components fit securely
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
