panda figurine 3d model

Design a decorative panda figure approximately 120–150 mm tall and 60–80 mm wide, modeled in a cute sitting pose, with one arm curved forward to hold a cylindrical bamboo stick (bamboo diameter 8–12 mm, length around 60–80 mm) positioned diagonally across the body; the panda body thickness should be around 12–15 mm for strength when 3D printed. On the back side (or bottom rear section), create a U-shaped mounting slot designed to clip onto a monitor with 8 mm thickness, so make the internal slot width 8.4–8.6 mm to allow 0.4–0.6 mm tolerance for easy fitting, slot depth 20–25 mm for stability, and wall thickness at least 4 mm to prevent breaking. Add small rounded inner edges (1 mm fillet) inside the slot to avoid scratching the monitor. If you want stronger grip, slightly taper the slot (for example 8.6 mm opening reducing to 8.3 mm inside) so it friction-fits securely. Keep all edges filleted (2–3 mm) for better print strength and appearance. Print in PLA or PETG with 30% infill and 3–4 wall perimeters for