3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
youssefabdelsamea2003
01-29 06:06
Model Name
offshore tugboat 3d model
Tags
3d printing
3d printing realistic
ballast
realistic
rudder
vehicle
vehicle 3d printing
vehicle 3d printing realistic
vehicle realistic
Prompt
Design a functional RC offshore tugboat for real-world 3D printing and operation, not decoration. Length ~80 cm, width 30–34 cm, height 35–40 cm. Use an offshore tug hull: large rounded bow, high freeboard, wide beam, deep displacement hull, reinforced flat keel, optimized for stability and heavy work in choppy water. Hull wall thickness 3–4 mm with internal ribs and bulkheads, watertight with gasket-ready seams. Raised foredeck, high central wheelhouse, and open rear working deck. Large internal volume for battery, ESC, receiver, motors, wiring, and ballast near the keel. Rear-mounted large-diameter propeller (single or twin) with optional Kort nozzle, rear rudder(s), torque-focused propulsion. Include a rear payload bay carrying 300–700 g with a servo-controlled drop hatch or trapdoor that releases payload on RC command. Removable deck/superstructure for maintenance. Split into printable sections with alignment pins and screw holes. Industrial offshore tug appearance, realistic propo
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
youssefabdelsamea2003
youssefabdelsamea2003youssefabdelsamea2003