3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1771252117
02-25 18:17
Model Name
robot housing 3d model
Tags
3d printing
3d printing sci fi
emo
machine
machine 3d printing
machine 3d printing sci fi
machine sci fi
sci fi
Prompt
Design a high-detail 3D printable robot housing inspired by a small cute EMO-style desktop robot. The body should be compact, futuristic, and slightly rounded with smooth curves and premium finish. The front should have a rectangular display window designed to perfectly fit a 0.96 inch OLED display (approx. 27mm x 27mm visible area, 30mm x 30mm mounting clearance). The display window should be slightly recessed with a clean bezel frame. Inside the head section, include mounting pillars and screw holes for a 30-pin ESP32 development board (approx. 52mm x 28mm). Add internal standoffs of 5mm height with M2 screw support. Provide proper cable routing channels from OLED to ESP32. Back side should have: USB port opening for ESP32 programming access Small ventilation slots Removable back cover with snap-fit or screw-fit design The robot should have: Small cute legs integrated into base Slight forward head tilt (friendly emotional look) Smooth matte surface finish Rounded edges for safe 3D printing Base should be flat and stable for desktop placement. Style: futuristic, minimal, premium consumer electronics design Suitable for FDM 3D printing (no extreme overhangs >45°). Wall thickness: 2.5–3mm Make it assembly-friendly and realistic for electronics installation.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1771252117
Anonymous1771252117