3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1782108371
06-22 06:35
Model Name
lotus pendant 3d model
Tags
3d printing
3d printing realistic
lotus pendant
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Design a lotus pendant for 3D printing and jewelry casting. Use a shallow-relief lotus with a completely flat back and a maximum overall thickness of 4mm. Include 7 symmetrical petals attached to a solid backing layer. Petals should have gentle curvature, smooth transitions, rounded edges, and minimal overhangs. Avoid deep undercuts, floating elements, and fragile details. Keep outer petals close to the pendant body rather than flaring outward, creating the look of a carved lotus emblem instead of a fully open flower. Integrate a simple circular chain hole directly into the top center petal, approximately 12mm in diameter, with no separate bail or jump ring. Ensure production-ready geometry with a watertight mesh, uniform wall thickness, and no unsupported overhangs exceeding 45°. Optimize for support-free printing when laid flat on its back. Suitable for resin printing, FDM printing, and lost-wax casting. Maintain a polished jewelry aesthetic with a clean lotus silhouette.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1782108371
Anonymous1782108371