raspberry pi tablet enclosure 3d

Design a realistic, functional 3D-printable enclosure for a custom Raspberry Pi 5B tablet. The enclosure is for a 10.1-inch LCD with exact outer dimensions of 233.36 mm wide x 142.88 mm tall (9 3/16" x 5 5/8"). The screen itself is thinner than the Raspberry Pi 5’s Ethernet and USB port stack. The finished device should look like a commercial tablet or small iPad, not a bulky electronics project box. FORM: - Landscape orientation. - Thin front bezel. - Rounded tablet-style corners. - Smooth, clean rear shell. - Keep the majority of the tablet as thin as possible. - Do not make the whole case as thick as the Ethernet/USB ports. - Create only a small, smooth raised electronics section where the Raspberry Pi requires extra depth. - Blend the raised section gradually into the rear shell. RASPBERRY PI 5: - Mount a Raspberry Pi 5 Model B flat behind the display. - Position it near one edge so the Ethernet and USB ports can be accessed externally. - Provide openings for Ethernet, USB