3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1769507855
01-27 10:22
Model Name
fuel cap sensor 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
waterproof
Prompt
Design a realistic, manufacturable 3D product called FuelGuard, a circular metal ring installed between a fuel tank neck and fuel cap. The product detects cap opening using an internal tactile limit switch. The switch must be fully enclosed inside the metal body, with only a small red plunger visible on the top, making it waterproof and fuel-safe. Use a tactile switch approx. 6.0 mm wide × 5.0 mm deep, plunger height ~4.5 mm, travel 0.25–0.5 mm. The switch plunger faces upward and is pressed directly by the fuel cap when fully closed. Any loosening releases the plunger and triggers detection. Inside the ring, create a rectangular pocket sized 6.1 × 5.1 mm with +0.1 mm tolerance for a snug press-fit. Lock the switch using either a thin metal back plate with micro screws/snap-fit or fuel-resistant epoxy potting. The switch must not move. Add a 0.8–1.0 mm silicone membrane above the switch for waterproofing; the red plunger presses the membrane, which presses the switch. Include an O-r
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1769507855
Anonymous1769507855