3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1767768862
01-11 16:59
Model Name
desk tool organizer 3d model
Tags
props
3d printing
realistic
Input
Prompt
Design a single-piece, 3D-printable Gunpla / Gundam model kit tool holder intended for use on a hobby desk. The object must be fully described by text only and not rely on any reference images. 1️⃣ Overall Footprint & Orientation The tool holder is designed to sit on an A4-size cutting mat in landscape orientation Maximum external dimensions: Width (X-axis): 290 mm Depth (Y-axis): 210 mm Height (Z-axis): ≤ 120 mm The base must be perfectly flat and rectangular Base plate thickness: 4 mm All measurements must be in millimeters 2️⃣ Base Geometry Rectangular base with: Rounded outer corners (radius: 6 mm) Slight chamfer on bottom edges (1 mm × 45°) for print reliability Bottom face is fully flat (no feet, no recesses) Top of the base transitions smoothly into storage sections using fillets (radius 3–6 mm) 3️⃣ Layout (Left → Right) 🟦 LEFT SECTION — Vertical Tool Block A raised rectangular block occupying the left 35% of the base width. Block dimensions: Width: ~100 mm Depth: ~90 mm Height: ~110 mm Vertical Tool Slots (Top-Facing) All slots are blind holes, NOT pass-through. Nipper Slot A Rectangular slot Width: 14 mm Depth (front-to-back): 25 mm Hole depth: 45 mm Nipper Slot B Identical to Slot A Positioned 15 mm apart Hobby Knife Slot Rectangular slot Width: 11 mm Depth: 22 mm Hole depth: 50 mm Inner bottom fully enclosed for safety Tweezers Slot Slim rectangular slot Width: 7 mm Depth: 20 mm Hole depth: 40 mm All slot openings have 2 mm chamfer Slot interiors have rounded internal corners (radius 1.5 mm) 🟦 CENTER SECTION — Angled Storage Shelf A sloped, recessed shelf in the center area. Shelf angle: 15° upward from front to back Purpose: sanding sticks, metal files, hobby rulers Shelf dimensions: Width: ~120 mm Depth: ~120 mm Wall height (rear): 20 mm Front lip height: 6 mm Shelf surface has: Subtle longitudinal grooves (1 mm depth) Raised side walls (3 mm thick) 🟦 RIGHT SECTION — Pen & Marker Array A vertical pen holder block on the right side. Block dimensions: Width: ~70 mm Depth: ~90 mm Height: ~100 mm Circular Holes Quantity: 6 Hole diameter: 11.5 mm Hole depth: 30 mm Evenly spaced in 2 columns × 3 rows Hole bottoms are flat, not through-holes 1.5 mm chamfer on top edge of each hole 4️⃣ FRONT SECTION — Small Parts Tray A shallow tray running along the front edge of the base. Tray dimensions: Width: ~260 mm Depth: ~45 mm Depth (vertical): 10 mm Tray features: Rounded internal corners (radius 4 mm) Raised perimeter lip (2.5 mm) Flat bottom surface Designed to hold: Polycaps Stickers Small armor pieces 5️⃣ Structural & Print Constraints Material: PLA or PETG Wall thickness: 2.4–3.0 mm No overhangs greater than 45° No supports required All transitions between sections use fillets Model must print upright as a single piece 6️⃣ Design Language Clean, functional, workshop-style aesthetic Inspired by Gunpla hobby desks No logos, no text, no branding Neutral industrial look Prioritize usability and stability over decoration 7️⃣ Output Requirements Output must be: A dimensionally accurate STL Or a fully parametric CAD model Real-world scale Clean manifold geometry Ready for direct 3D printing
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1767768862
Anonymous1767768862