garment hanger attachment 3d model

Design a slim garment-hanger attachment for holding the sleeve of a long-sleeve shirt, including sizes up to 2XL. The main body should be a simple, thin straight pole long enough to reach from a standard clothes hanger to the end of a 2XL shirt sleeve. The pole should stay behind the shirt so it is mostly hidden during use. At the top, the attachment should hook or hang onto a regular clothes hanger. At the lower end of the pole, add a rectangular mesh or grid section approximately 4–5 inches long. This mesh section will sit near the end of the shirt sleeve and help support and spread the fabric. The very end of the mesh should have approximately four square grid openings. The attachment should sit slightly lower than the normal clothes hanger so the sleeve hangs naturally. This design can be used for either the left or right sleeve. Instead of making two different parts, the same part should work on the opposite side by rotating or flipping it. Keep the overall design simple,