dryer latch plate 3d model

3d printing 3d printing realistic props props 3d printing props 3d printing realistic props realistic realistic whirlpool

Prompt

Design an OEM-style Whirlpool dryer door latch receiver plate. IMPORTANT: The CENTER latch opening must be on the FRONT FACE of the part, NOT on the backside. The previous design was wrong because the latch receiver slot was placed behind the plate near the screw area. Correct structure: FRONT VIEW layout must be: TOP SCREW HOLE CENTER FRONT LATCH SLOT (visible from front) BOTTOM SCREW HOLE The dryer door hook enters directly into the FRONT CENTER SLOT when the door closes. Detailed requirements: - Vertical rectangular plate - Rounded corners - Slight curved backside to match dryer body curvature - White appliance-style finish - OEM factory appearance Dimensions: - Height approximately 95–110 mm - Width approximately 35–45 mm - Thickness approximately 4 mm Front latch slot requirements: - Visible rectangular opening on the FRONT FACE - Positioned exactly between top and bottom screw holes - Slot must go inward into a reinforced receiving tunnel/channel - Designed for the

v3.1-20260211

Related Models

3d model: three red hearts with floral thorn and olive elements in ornate circ

3d model: wooden spinning wheel on a simple frame with large fly wheel and spind

3d model: orange shield badge with white geometric lattice pattern

3d model: red wine bottle with cork and worn label on a wooden table corkscrew

3d model: white coffee cup with arms and legs coffee cup with text stylized 3D

3d model: ornate bas relief face plaque with intricate floral border in white

3d model: knight helmet medieval prop riveted steel with white cross visor ho