insulin syringe 3d model

Easy-Touch 1cc U-100 insulin syringe, pre-filled, stored horizontally in fridge. Syringe measurements: Total length (stored): ~120mm Barrel OD: ~12mm Orange needle cap: ~9mm dia, ~15mm long Plunger rod: ~3-4mm dia (cross-shaped) Finger grip wings: ~14mm wide Box design: 20 syringes total, 10 per half Clamshell style (like a pencil/glasses case) Flat rectangular tray with low divider ribs between syringes — no tight slots, just loose separation Flat lid with small retaining bumps pressing on each barrel Print-in-place living hinge on one long edge Snap closure on opposite edge No hardware, no supports Prints flat in one piece Print specs: PETG only (PLA cracks in fridge) 0.2mm layers, 3 walls, 20% infill Bed needed: ~170 × 260mm minimum Must have working hinges and latch. Mut fit in H2D printer plate. Must be snug fit and professional. Do not include syringe as that is physical product put into 3d print. You can check our history for example