3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1767800355
01-27 16:37
Model Name
mechanical part 3d model
Tags
machine
3d printing
realistic
Input
Prompt
Generate a highly accurate 3D model of a single-piece mechanical plastic component designed for an automatic pet food dispenser. The part is made of black injection-molded plastic (ABS or polypropylene), with a smooth satin finish and no texture, logo, or markings. The geometry is fully symmetrical and has a general V-shaped form. It consists of two semi-cylindrical chutes, open at the top, each angled at approximately 45 degrees from the central axis, forming an overall angle of about 90 degrees between them. Each chute has a length of 120 mm (longest side) and a depth of 58 mm (shortest side). The internal cross-section of each chute is rounded, with an estimated internal radius of 22–24 mm, and a uniform wall thickness of approximately 2.5 mm. The top edges are slightly rounded with small fillets, and all internal transitions are smooth, with no sharp edges. The central junction between the two chutes is clean and softly radiused. The total height of the part is approximately 55 mm, including the upper chutes and the lower mounting section. The lower section includes an integrated flat rectangular base used for mounting. This base features a central circular hole of approximately 5 mm in diameter, intended for a screw or pivot. Two flexible side snap-fit clips are integrated into the lower base, one on each side. These clips are designed for plastic enclosure mounting and slightly curve inward to allow elastic deformation during assembly. The model should be mechanically realistic, watertight, manufacturable, and suitable for 3D printing or injection molding, with proper fillets, consistent wall thickness, and industrial design standards.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1767800355
Anonymous1767800355