3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
3D Creation Made Simple
Text & Image to 3D Model in seconds
One-Click Texturing & Smart Detail Editing
Free Credits Monthly
Start Free
Anonymous1776672434
04-26 17:30
Model Name
spherical drone sensor pod 3d model
Tags
machine
rendering
realistic
Prompt
Generate a precise 3D engineering prototype model in a clean studio orthographic view of an articulated Ø100mm spherical drone sensor pod. The pod is 3D-printed in matte gray plastic with visible M2, M2.5, and M3 hardware. A 35mm wide vertical viewing slot arcs from 10° to 110°. Inside, a 40x20x36.5mm MG995 high-torque servo is fixed to the left wall via M3 standoffs. Attached to the servo spline is a structural internal cradle holding a sensor array. The cradle features a 38mm x 38mm flat mounting area with four M2.5 screw holes at a 30mm pitch to house the Raspberry Pi High Quality Camera. It also includes an inner M2 bolt pattern at a 21mm pitch for a standard 25x24mm camera module. Directly adjacent are M2.5 bosses spaced 33mm apart for a 42x15mm TFmini-S LiDAR module. The cradle must have a 12mm depth clearance to accommodate the camera's C-mount lens housing. A 4mm secondary pivot pin is aligned with the servo axis on the opposite wall. Internal channels for a CSI ribbon cable.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
