3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1777522456
05-01 03:16
Model Name
domestic cat 3d model
Tags
3d printing
3d printing stylized
creatures animals
creatures animals 3d printing
creatures animals 3d printing stylized
creatures animals stylized
domestic cat
fdm printing
stylized
Prompt
Generate a realistic domestic cat 3D model optimized for FDM printing with the following strict requirements: Pose & Geometry: Cat lying prone in a relaxed "loaf"/sprawled position, belly down The entire underside must be completely flat and coplanar — the belly, all four legs/paws, and the tail must all rest on a single flat plane (the print bed). No part of the underside should curve away from this plane. Belly: flattened against the ground (not rounded) All four legs: extended outward and laid flat on the same ground plane as the belly, with paws flat (not tucked under the body, not curled). Think of the cat as if it were "pressed" onto a flat surface from above. Tail: extended straight out behind the cat, lying completely flat on the same ground plane (not curled, not raised) Why this matters (for the model): This flat underside is required so I can later slice the legs and tail off the body along that single plane and re-attach them as articulated joints. Each limb and the tail
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1777522456
Anonymous1777522456