3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
birula6666
11-01 16:50
Model Name
terrarium hide 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
terrarium
Prompt
Generate a SINGLE-PIECE, watertight (manifold) 3D model of a TWO-TIER terrarium hide for a leopard gecko (Eublepharis macularius) with an INTEGRATED RAMP. No separate parts or removable lids. Units in millimeters. Z-up. Model oriented flat on the build plate. Style: natural sandstone/rock with soft undulations; safe, rounded geometry everywhere. PRINTER ENVELOPE - Must fit completely within 220 × 220 × 250 mm. - Target overall envelope ≤ 208 × 208 × 140 mm to allow brim/margins. OVERALL LAYOUT (single body) - Footprint (outer base): 205 × 160 mm; overall height: 120–130 mm. - Lower level: main hide cavity inside the base. - Upper level: open lounging/observation deck. - A continuous switchback/wrap-around ramp connects ground level to the upper deck. FLAT INTERIOR FLOOR (strict requirement) - Hide interior floor is perfectly flat (0° slope), rectangular area 165 × 115 mm. - Interior floor Z-height = +5.0 mm from the external bottom (i.e., 5.0 mm base thickness under the floor). - Add a 0.3 mm × 45° anti-elephant-foot chamfer along the OUTER bottom edges only; the interior floor itself remains flat. DETAILED DIMENSIONS - Base (external): 205 × 160 × 5.0 mm thick. - Walls: nominal thickness 3.2 mm (≥3 perimeters with 0.4 mm nozzle). - Hide cavity (internal): ~165 (L) × 115 (W) × 72 (H) mm measured above the flat floor. - Entry opening to hide (front): 60 mm wide × 50 mm tall; elliptical/arched; fillet edges R = 4 mm. - Upper deck: 190 × 120 mm usable area at Z ≈ 70–75 mm (top surface mostly flat with slight organic contouring). - Deck thickness: 4.0 mm; underside forms the hide “ceiling”. RAMP (integrated, supportless) - Configuration: two-run switchback hugging the outer perimeter with a mid landing. - Ramp width: 65 mm clear. - Slope: 15–16° target (max 18°). - Rise to upper deck: ~70–75 mm total; two runs + 1 landing achieve the rise. - Landing (turning platform): 70 × 65 mm at mid-height (~35–38 mm). - Treads (grip bars): 2.5 mm tall, 2.5–3.0 mm thick, 10–12 mm pitch, with soft ends (hemispherical/filleted). - Side curbs/guard rails: 7 mm tall × 3 mm thick, continuous along both ramp edges with radiused top (R = 1.5 mm). SUPPORT-FREE INTERNAL CEILING - Hide ceiling (underside of upper deck) shaped as a segmental vault with local overhang ≤ 45°. - Vault spring line ~35–38 mm above the interior floor, crown at ~72–75 mm. - Blend vault into walls with internal fillets R = 3–4 mm to avoid thin edges. VENTILATION & SAFETY - Vent rows on rear and one side: Ø3.5 mm holes, 3 rows × 6 holes per row (18 total), triangular/brick pattern, center-to-center ~15 mm; all holes with 0.5 mm edge fillet. - No sharp points; all external edges R = 4–6 mm; internal edges R = 2–4 mm. - No slots or gaps < 6 mm where toes could get trapped. SURFACE & TEXTURE - Exterior: organic sandstone look with micro-texture amplitude 0.2–0.4 mm (gentle noise/waves), no features < 0.5 mm. - Interior (floor and walls): smoother than exterior; light satin texture only (amplitude ≤ 0.15 mm) for easy cleaning. - Optional subtle rock details on deck perimeter; keep deck top largely flat/usable. PRINTABILITY (FDM, 0.4 mm nozzle) - Perimeters: 3–4; top/bottom solid layers: ≥5; line width 0.42–0.48 mm acceptable. - Avoid internal overhangs > 45°; no hidden cavities that require supports. - Bridges: ≤ 20–25 mm. Use catenary/segmental profiles where possible. - One-piece orientation: place the flat external base on the build plate; no supports required for interior vault and ramp. - Underside anti-slip pockets: four shallow NON-through pockets Ø9 mm × 2.5 mm depth for adhesive pads. MATERIAL & ENVIRONMENT - Optimize for PETG or PLA in warm terrarium conditions (avoid thin spires). - Priority: durability, rounded geometry, easy cleaning, and a perfectly flat interior floor. FILE OUTPUT - Provide ONE clean, closed, non-self-intersecting mesh (monolithic), scaled in millimeters; outward-facing normals; manifold; no internal shells. - Orient Z-up, base on Z=0 plane.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
birula6666
birula6666birula6666