3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1763155759
12-10 16:35
Model Name
stainless steel reactor 3d model
Tags
bioreactor
impeller
machine
machine realistic
machine rendering
machine rendering realistic
realistic
rendering
rendering realistic
stainless steel reactor
turbine
Prompt
“Generate a technically accurate 3D bioreactor with an internal agitation system. The impeller MUST be a TRUE axial-flow impeller, NOT a fan, NOT a propeller, and NOT a radial turbine. The impeller must have: 🔹 Correct blade orientation – 6 blades angled upward 30–45° (positive pitch). – Each blade must tilt UPWARD along the shaft axis, NOT forward, NOT flat, NOT horizontal. – The leading edge of each blade must be lower, and the trailing edge must be higher, forming a clear upward pitch. – The blade surface must push fluid upward, NOT sideways and NOT forward. – The blade root must attach to the central hub with a VISIBLE upward angle. 🔹 Correct shape – Thick industrial blades, NOT thin propeller fins – NOT curved like a household fan – NOT shaped like airplane propellers – The blade must look like a pitched axial impeller used in bioreactors (PBT-style or hydrofoil style). 🔹 Correct position – Place the impeller on the central shaft – Located at exactly ONE-THIRD (1/3) of the total vessel height – NOT touching the bottom – Shaft length must match this position 🔹 Strict correction rules – If the impeller blades are flat, pointing forward, or shaped like a fan → REGENERATE. – If the blades do not clearly tilt upward → REGENERATE. – If the blades are radial or turbine-style → REGENERATE. – If the impeller is at the bottom → REGENERATE. 🔹 Resto del modelo (igual que antes) – stainless-steel vessel – side windows – ports, valves, motor, gearbox – internal baffles – conical bottom with drain – support legs – clean, watertight geometry
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1763155759
Anonymous1763155759