3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1765142228
12-07 21:46
Model Name
electronic enclosure 3d model
Tags
electronic enclosure
machine
machine realistic
machine rendering
machine rendering realistic
realistic
rendering
rendering realistic
Prompt
Generate ONLY the BOTTOM FRONT SHELL for a handheld clamshell device. This is a MECHANICAL CAD PART. Do NOT smooth or round anything unless stated. STRICTLY follow these instructions. ### CRITICAL RULES FOR TRIPO - NO electronics. No internal components. No shapes that look like chips, ports, or boards. - Use ONLY flat surfaces, straight walls, and perfect cylinders. - DO NOT blend or merge shapes. Every feature must remain sharp and distinct. - DO NOT curve or soften the walls or pockets. ### Outer Shell - Outer size: 166 mm wide × 114 mm deep × 26 mm tall. - Walls are perfectly vertical. - Top edge is flat, thin-bezel modern laptop style. ### Keyboard Recess - Add a centered rectangular recess: 163 mm × 70 mm × 3 mm deep. - ONLY the bottom-right corner of this recess has a 15 mm radius. - All other corners perfectly sharp. - Straight vertical inner walls. ### Internal Pockets (must be clean rectangles) - Battery: 102 × 52 × 15 mm behind the keyboard. - Pi Zero: 67 × 32 mm on the left behind battery. - PowerBoost: 56 × 35 mm on the right behind battery. - Fuel gauge: 32 × 17 mm centered between Pi and PowerBoost. - All pockets must be EMPTY and rectangular. ### Wiring Channels - Add straight rectangular channels (no curves) connecting the pockets. - Channel width: 3 mm. ### Screw Posts - EXACTLY 6 posts. - Cylindrical, 8 mm tall, 6 mm diameter. - Clean vertical cylinders with 2.7 mm holes. - One at each corner + left-middle + right-middle. - DO NOT merge posts into walls. ### Alignment Lip - Add a PERFECT 1 mm high × 1 mm wide lip around the bottom perimeter. - This lip must be rectangular and continuous. ### Hinge Barrels - Add TWO hinge barrels at rear center. - Barrel OD: 7 mm. - Barrel length: 10 mm. - Clean 3.0 mm bore. - Barrels must be straight cylinders (NO smoothing). - Hinge block must be a straight rectangular piece behind the barrels. ### Cable Port - Add a centered 6 mm diameter hole below the hinge barrels. - Clean circular hole, sharp edges. ### DO NOT ADD - NO rounded organic shapes. - NO extra bevels. - NO fillets except the single 15 mm keyboard corner. - NO smoothing. - NO extra shells or layers. This must look like a TRUE engineered enclosure, not a softened or organic model.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1765142228
Anonymous1765142228