3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773174666
03-11 10:37
Model Name
heroic knight 3d model
Tags
3d printing
3d printing stylized
armor
character
character 3d printing
character 3d printing stylized
character stylized
knight
knight figure
stylized
Prompt
Hela, the Goddess of Death, stands in a menacing pose, wearing her iconic horned helmet and radiating dark, magical energy. Mounted on a standardized, circular chess base with a subtle design. Model height approximately 90 millimeters. Objective - Produce a clean, watertight, print-ready character sculpt that captures a heroic, authoritative presence and iconic silhouette while remaining stable on a chess-style base. Design Intent (reasoning before execution) - Iconicity: Prioritize instantly recognizable elements (round shield with central star and rings; chest star; scale-textured torso; ‘A’ on cowl; gloves/boots; belt pouches). - Stability: Keep center of mass within the base footprint; avoid top-heavy shield placement; ensure broad, planted stance. - Printability: Favor emboldened, shallow relief details; minimize unsupported overhangs; split parts and key joints for clean assembly. Pose and Composition - Stance: Left foot forward, right foot back, slight knee bend; hips and shoulders counter-rotated for dynamic tension; head forward and slightly up. - Shield: Held steadily on the left forearm, face angled ~30–45° toward the viewer; edge not extending beyond base diameter. - Right arm/hand: Fist at side or lightly clenched near belt; posture conveys command rather than motion. - Silhouette: Triangular upper-body massing; shield reads clearly from front and 3/4 views; no major elements hidden behind others. Costume and Prop Details (classic comic) - Torso: Five-point chest star; stylized scale mail on upper chest/shoulders (shallow, printable pattern). - Colors for reference only (model is monochrome): blue cowl/torso, red gloves/boots, white accents; ‘A’ on forehead; optional small wing motifs on cowl as low-profile relief. - Belt: Simple pouches (2–3 mm proud); straps for shield with visible buckles; avoid micro-details below print resolution. Chess-Style Base - Default spec: 35 mm diameter, 5 mm height; 0.8–1.0 mm top edge chamfer; subtle concentric ring or minimal insignia; bottom flat. - Stability: Feet fully within base; add discrete contact pins under boots if needed. - Optional: 6×2 mm magnet recess on underside (centered), filleted edges. Scale and Dimensions - Default measurement: 80 mm from top of head to top surface of base (figure height); base adds 5 mm (total ~85 mm overall). - Shield diameter: ~32–34 mm; shield thickness: 2.0–2.5 mm rim, 1.2–1.6 mm face. Part Breakup and Assembly - Separate parts: head; right arm; left arm with shield; body/legs as one; base separate. - Keys: D-shaped or trapezoidal pegs, 3.0–4.0 mm diameter/width, 0.2–0.3 mm clearance; keyed orientation prevents misalignment. - Drain holes (for hollowed resin parts): 2–3 hidden holes, 2 mm diameter minimum. Printability Constraints (defaults) - Intended process: resin SLA/DLP. - Minimum embossed/engraved detail: ≥0.3 mm height/depth; minimum wall: ≥0.8 mm (resin) or ≥1.2 mm (FDM variant). - Overhangs: keep ≤55° where possible; add supporting contact pads under overhang-prone features. - Avoid knife-edges; fillet or chamfer thin rims. Topology and File Prep - High-poly sculpt: 2–6 million tris acceptable; decimate to 600k–1.2M for print part files. - All exports manifold, no self-intersections, outward normals, single watertight shell per part. - Hollow large parts (2.0–2.5 mm wall) for resin to reduce suction; leave internal bridges open. Deliverables - Print-ready STLs: one per part, oriented as exported, in millimeters. - Assembled one-piece STL variant (for larger printers) with same scale. - Optional: pre-supported resin STLs and Lychee/ChiTu project files (.lsp/.ctb) with support settings noted. - Source: high-poly OBJ or ZTL; simple exploded diagram or labeled screenshot of part layout. - Readme: scale reference, assembly notes, and recommended printer settings. Quality Checklist (acceptance criteria) - Stands flat and stable on base; no part extends beyond base edge. - Iconic elements readable at arm’s length: shield star/rings, chest star, ‘A’ on cowl, belt pouches. - No overhangs beyond guidelines without clear support strategy; no fragile spikes <0.8 mm (resin) or <1.2 mm (FDM). - All parts key together with stated clearances; test alignment virtually (no collisions); - Files open without repair in PrusaSlicer/Lychee/Chitubox; passes netfabb/manifold check. Examples (pose variants—choose closest to intent) - Variant A (default): Shield forward at ~35°, right fist at side, chin up, commanding. - Variant B (more guarded): Shield vertical near left thigh, right hand on belt, torso slightly turned. Output Format - Provide a ZIP containing: /STL_print (individual parts + one-piece), /Source (OBJ/ZTL), /Slicer (optional project files), README.txt with scale and settings. - Units: millimeters; origin centered at base; +Z up.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!