3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1767954118
01-09 10:59
Model Name
hibiscus flower 3d model
Tags
3d printing
3d printing realistic
hibiscus
hibiscus flower
nature environment
nature environment 3d printing
nature environment 3d printing realistic
nature environment realistic
realistic
Input
Prompt
Hibiscus-shaped flower tray modeled as a single continuous solid form. The geometry consists of five broad overlapping petals radiating from a central point, with each petal featuring smooth curvature, subtle surface undulations, and rounded edges. The upper surface forms a shallow concave profile that opens outward, while the underside is completely flat to ensure stable placement on a horizontal surface. The central region transitions gradually into each petal without sharp edges or thin attachment points. Any pistil or stamen elements may be omitted or integrated as a low-profile relief so that no fragile or unsupported structures remain. The overall diameter may range between approximately 120–180 mm, with a shallow central depth of about 5–15 mm to maintain a functional dish-like form. For 3D printability, all thin sections should maintain a minimum thickness of 2.5–3.0 mm for FDM/FFF or 1.5–2.0 mm for resin printing, and overhangs should be minimized or kept at gentle angles. The model must be a closed, manifold solid without internal gaps or disconnected parts. A smooth surface finish is preferred to allow post-processing such as sanding and painting in glossy red-pink tones to emulate a realistic hibiscus flower appearance.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1767954118
Anonymous1767954118