tipping-bucket rain gauge 3d

“High-resolution 3D model of a digital tipping-bucket rain gauge (pluviômetro de báscula) designed for Arduino-based meteorological station: A cylindrical collector funnel mounted on a sturdy outdoor rated aluminium or acrylic housing, with a dual-arm tipping bucket mechanism inside visible through a transparent side panel. One bucket tip causes a reed switch pulse when an embedded magnet passes by the sensor. The housing is sealed for weather protection, with cable gland for sensor/power wiring. On the side, a small electronic module board (Arduino or microcontroller) with two wires connected to the reed switch, and optionally an LCD display panel mounted externally showing “Pulsos:” and “Chuva: mm”. The unit is mounted on a vertical support pole, located in an open environment with rainfall droplets falling into the funnel, water dripping out the overflow drain. Materials: matte aluminium housing, transparent polycarbonate panel, black sensor arm, green circuit board, red magnet tip. Lighting soft daylight,